1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

ST-90 Help

Discussion in 'Meyer / Diamond Products Discussion' started by cvfd277, Nov 16, 2013.

  1. cvfd277

    cvfd277 Junior Member
    Messages: 6

    I am reworking my older ST-90 plow and need help locating a replacement moldboard skin. Does anybody know if I can still get one and where? My local machine shop wants over $300 to
    fabricate one. Any help?
     
    Last edited: Nov 16, 2013
  2. Spend the 300 if its a steel skin.

    If your skin has some holes but frame is good consider
    a Clear Lexan Shield to go over the front.
    Extremely strong,about 175.00
     
  3. basher

    basher PlowSite Fanatic
    from 19707
    Messages: 8,992

    Not a bad price, if you find one cheaper somewhere freight will kill all your savings.

    you could also consider patching the holes and installing a plastic "skin" over it. they are normally under $50 and available though most SAM dealers. You can buy them here, if you call ask for Jim in parts and tell him I sent you.

    http://www.equipmentspecialistsinc.com/ecom-prodshow/1310020.html
     
  4. cvfd277

    cvfd277 Junior Member
    Messages: 6

    OK, thanks for the input and the link. Both have been very helpfull