1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

some sheet metal work

Discussion in 'Ford Trucks' started by cpsnowremoval, Nov 24, 2009.

  1. cpsnowremoval

    cpsnowremoval Senior Member
    Messages: 223

    well got tired of the rigged up floor the guy before me did. he used some real thin sheet metal im looking to put in 16 gauge. finally i can make some use of my fluxcore welder. i dont trust it enough to weld the plow frame. darn wisconsin winters

    Picture 019.jpg

    Picture 020.jpg
     
  2. JDWalkbehind

    JDWalkbehind Senior Member
    Messages: 274

    ouch. i'm suprised the rockers still there. post some pic's of your progress as you go. What year is the truck?
     
  3. cpsnowremoval

    cpsnowremoval Senior Member
    Messages: 223

    its a 1987 f150 my uncle told me the 80s had alot of problems with rust. its in the garage for till at least saturday when i get my headers from summit. bought some from a guy for 20 but they exit out on the slave cylinder. now im trying to sell them

    Picture 011.jpg

    Picture 012.jpg
     
  4. cpsnowremoval

    cpsnowremoval Senior Member
    Messages: 223

    not the best looking but it works

    Picture.jpg
     
  5. Dissociative

    Dissociative 2000 Club Member
    Messages: 2,066

    superb....looks mean with all the rivets...like a airplane or something...
     
  6. thesnowman269

    thesnowman269 Senior Member
    Messages: 953

    deffinatly looks like a part of an airplane but i like it good work there