1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Snowway problems

Discussion in 'Commercial Snow Removal' started by Dan Massey, Dec 7, 2004.

  1. Dan Massey

    Dan Massey Junior Member
    Messages: 8

    Hello, I posted earlier was just wondering if any one else had ny comments. My snowway plow which worked fine in the summer won't raise after I hooked it up last night. The relay seems to click sometimes, and there is 12 volts going in and 7v going out. I cannot check @ the pump because I'm doing this myself. Earlier someone suggested to clean the terminals @ the plow dicsconnect. This is my first plow and I don't know what to do. It is a 6'8" snowway on a 2003 F-150. Thanks in advance for any help.
  2. bigcityracer

    bigcityracer Junior Member
    from 60616
    Messages: 1


    You might want to check the side penal on the pump usually it
    has four or five screws holding it together.
    The cable hooks to a rod in their and some times
    it will stick from rust or ice and it also adjust its too.
    on how fast it goes up or down.
  3. larryjlk

    larryjlk Member
    Messages: 66

    Hey Dan, try this from my owner's manual. Hope you can read it.
  4. martyman

    martyman Senior Member
    Messages: 281

    last winter I had the same problem with my Western and found out the electric motor was siezed from sitting outside in the weather.