1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

snowex controller EO code

Discussion in 'Ice Management' started by mfalc, Jan 21, 2011.

  1. mfalc

    mfalc Junior Member
    from pa
    Messages: 2

    i have a controller for an 1875 installed in my truck, and want to run another spreader that doesn't have an auger in it. i bought a new 1875 spreader wire, but only hooked up the spinner and the vibrator why do i keep getting an 'EO' code< or more importantly how do i fix this
  2. grassmaster06

    grassmaster06 Senior Member
    Messages: 415

    No power code, somewhere your connection is bad usually at the spinner
  3. Westhardt Corp.

    Westhardt Corp. Senior Member
    Messages: 845

    If it works like the bigger SnowEx controllers, it stands for "Electrical Open" in the spinner circuit. More often then not, it results from corrosion at the spinner's plug in connection. Not sure on the 1875--never used one. But I imagine that it's much the same. Just make sure you pack that connection with die-electric grease after you clean it out.