1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

SnowEx 1875. Need alibration help

Discussion in 'Ice Management' started by hortboy, Dec 2, 2005.

  1. hortboy

    hortboy Junior Member
    Messages: 14

    Been powing for years and finally had to break down and buy a salt spreader for some account or I'd loose them.

    I purchased the 1875 model for SnowEx and was wondering you guys could help me w/ setting for the Auger feed so I'm not doing alot of guess work w/ our first major snow.

    I have the calibrated the spinner speed and have a goo idea of that.

    Thanks and any info is greatly appreciated
     
  2. flykelley

    flykelley 2000 Club Member
    Messages: 2,124

    Hi hortboy
    I have a Vpro8000 and the auger speed is always on full. Its the only ***** I have about this spreader is the feed rate. I am going to make a mod to the baffle plate. I would say just go out and try it about 1/2 of the full speed and see what happens. Other than that I do like my snowex. Please post a review for the group here as we are all interested in how it works out.

    Good Luck Mike