1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

snoway wired controller "no reciever"

Discussion in 'Truck & Equipment Repair' started by whniles, Nov 30, 2014.

  1. whniles

    whniles Junior Member
    from 16901
    Messages: 2

    I have a 29 model with dp. and a wired controller. went to hook up and got message from controller "no reciever" un hooked and brought in to warm up over night by the wood stove. Tried this morning and the same thing. So I guess I need a new reciever..is there any thing else I should look for?

    thanks
    Bill
     
  2. Rick547

    Rick547 Senior Member
    from Indiana
    Messages: 535

    Are you talking about the hand held controller? If you are. Plug it in at the plow and give it a try.
     
  3. whniles

    whniles Junior Member
    from 16901
    Messages: 2

    I plugged the hand held in at the plow. It was the receiver that i took in to try to dry out. (sorry I wasn't clear) I have power at all the selinoids. After drying the receiver I still get "no receiver".