1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

SNOWAY-I need wiring diagram for switch at pump

Discussion in 'Commercial Snow Removal' started by tacraven, Jan 24, 2005.

  1. tacraven

    tacraven Junior Member
    Messages: 15

    I have a snoway from about 1997. I need a wiring diagram for the switch at the pump/motor area. I have the joystick. The switch when mounted, to the plastic housing around the pump, has an "on" option, "off" and "raise." There are 6 terminals on the back of the switch.

    2 yellow
    2 blue
    2 brown, one has a place to attach another wire-maybe the other brown wire?

    please help

    I want to avoid calling the dealer :waving:
  2. Mebes

    Mebes Senior Member
    Messages: 386

    I don't know if this is the right schematic but I will upload it anyway.

    It's from a manual I have for the 24 and 25 SERIES SNOW PLOW WITH DOWN PRESSURE SYSTEM FOR PLOW SERIAL NUMBERS AFTER 24D100000 25D100000.

    PM me if you want me to send you a copy of this manual.

  3. tacraven

    tacraven Junior Member
    Messages: 15

    Awesome response. I am going to check my serial number in the morning and make sense of the different colored wires. I do not see the external toggle at the pump housing (it does show the toggle at joy stick box) but I think the color specifications should make sense of the matter. :D

    Thankyou very much,
    Tom Craven
  4. Mebes

    Mebes Senior Member
    Messages: 386

    The switch on the side is for the down pressure models.
    But I would assume that the rest of it is the same.
    Let me know if you need this manual I have it in my computer.