1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Snow plow disassembly repainting it

Discussion in 'Fisher Engineering Discussion' started by snowman123, Nov 9, 2010.

  1. snowman123

    snowman123 Senior Member
    Messages: 205

    I have a fisher mm1 plow 8 foot that I am in the process of redoing at the moment. Everything is working out perfect except for the center pin that holds the plow to the frame that goes to the truck. I have no clue how to get this pin out. I have tried just about everything to get it out I think the problem is that the pin is a little bent and me hitting the bottom with a hammer isn't really helping much. I tried the jack didn't work. I really do not want to cut it as I have no money to replace it. if you guys can help that would be great thanks. The arrow is what I am talking about.

    By the way this picture is not a picture of my plow but it is almost identical.


    :mechanic:



    gfdgfg.jpg

    gfdgfg.jpg
     
  2. Flipper

    Flipper PlowSite.com Addict
    from CT
    Messages: 1,180

    It has a cotter pin going through it. Usually it is rusted and won't come out easily. Also the pin itseld may be bent and make removal harder. Need a bigger hammer.

    I would scrounge under the seat of you truck, find some spare change and change it if it is bent or rusted. Its less then $10.
     
  3. snowman123

    snowman123 Senior Member
    Messages: 205

    Flipper

    Thank you Flipper I am almost positive that it is bent so I will keep trying thanks again.

    :mechanic:
     
  4. snowman123

    snowman123 Senior Member
    Messages: 205

    finally

    I finally got it out thanks to all.
     
  5. mtnzone

    mtnzone Member
    Messages: 82

    those pins are pretty cheap..
     
  6. You said thats not your plow in the picture but if its someone you know advise them to get the rust out from behind that cutting edge and retighten the bolts. One good whack on that trip edge will snap the bolts right off when it's loose like that.