1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

sno way wont work

Discussion in 'Sno-Way Discussion' started by joei, Jan 30, 2009.

  1. joei

    joei Junior Member
    from ohio
    Messages: 1

    just got a used snow way and it wont work any chance its the controler? or the computer and if so where would i get these parts?
  2. rhkfwain

    rhkfwain Senior Member
    from FWA, IN
    Messages: 304

    Model number, serial number and additional description of problem would be helpful.
  3. nbenallo33

    nbenallo33 Senior Member
    Messages: 826

    need some more info??? is it a wireless control? change the batteries. do you know how to turn the control on? old style control (handheld) press on/off, up, down, dp, on/off. new style handheld press the on/off, dp button same time. check for fuses and battery connections. try pluging your control right to the plow, might have pinched wires somewhere... that is some tips without knowing what plow you have
  4. nbenallo33

    nbenallo33 Senior Member
    Messages: 826

  5. hydro_37

    hydro_37 PlowSite Veteran
    from iowa
    Messages: 3,790

    There is NO computer on the plow.
    Hooking it to a battery will help ALOT tho.
  6. basher

    basher PlowSite Fanatic
    from 19707
    Messages: 8,990

    Sure it could be the controller, could be the computer (receiver) or it could be the 12 volt motor soleniod. Also could be you don't have all the wires hooked up, they are twisted off in the plug or the fuse is blown under the pump cover. Could be your motor is burned up or the power cable has broken.

    But if you answer the earlier questions we might narrow it down a little closer;)