1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Sno Way controller (wired) lost signal

Discussion in 'Commercial Snow Removal' started by dapozer, Sep 30, 2012.

  1. dapozer

    dapozer Junior Member
    Messages: 1

    Went to hook the blade up today and I cannot get the controller to work. It will power up and then beep to no signal. this is on a 29hd less than 1 year old. Any ideas?
  2. basher

    basher PlowSite Fanatic
    from 19707
    Messages: 8,990

    New Pro controller?
    Check the connections be sure all the pins are set in the plugs and none of them are bent. Make sure the fuses under the pump cover are not blown and make sure the red wire w/black stripe and the red wire with the white stripe have 12volts and you have a good ground.

    If it's less then 2 years old take it to Lampert's or another snoway dealer it should still be under warranty. If you go to Lampert's tell Nick, Basher says HI.
    Last edited: Sep 30, 2012