1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Sno-way 26d clicking

Discussion in 'Truck & Equipment Repair' started by VnDrWLawnCare, Jan 1, 2013.

  1. VnDrWLawnCare

    VnDrWLawnCare Member
    Messages: 67

    Hope someone can help me out here. I used my 26d for a couple of hours straight with no problems last night, then dropped the blade and went to apply DP and I noticed it would not apply. Went to go up- Nothing, side to side- Nothing. Thought the clicking was the solenoid, so i replaced and still nothing. Voltage meter show power through the solenoid. Ran battery cables from the truck battery straight to the plow motor and nothing still. All fuses are still good and connections appear tight. Only get the clicking. Any suggestions? Thanks
  2. Rick547

    Rick547 Senior Member
    from Indiana
    Messages: 535

    Check and see if the bolts holding the pump motor on are not lose and backed out. It happened to me last year.