1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

sno pro 3000 jack stand

Discussion in 'SNO-PRO PLOW AND ACCESSORIES by Curtis' started by Ferrisdiesel, Nov 29, 2012.

  1. Ferrisdiesel

    Ferrisdiesel Member
    Messages: 32

    So my jack stand has not been working on my sno pro 3000 since last season. The pump runs when I hit the switch, but nothing happens. I am going to change the fluid and clean the valves this weekend. However, on a hunch.....the hunch being the jack would never retract when I would push the button to retract it, I unbolted the jack from the bottom of the plow and the ears that sits on the piston was sheared right off! I'm going to try and weld up a new ear on the jack my other question is does anyone know where I can get a schematic of how the jack ears goes onto the piston, in relation to the retract spring?
     
  2. amocerino

    amocerino Senior Member
    from 01606
    Messages: 177

    You can give me a call 1-800-343-7676 ex 3042.
     
  3. SD40T2

    SD40T2 Member
    Messages: 47

    the ears slide between the spring and cylander........just had mine apart changinig jack return spring
     
  4. Ferrisdiesel

    Ferrisdiesel Member
    Messages: 32

    Awesome! How much tension needs to be on that spring?......which nut do I turn to tighten up the tension?
     
  5. amocerino

    amocerino Senior Member
    from 01606
    Messages: 177

    There are 3 nuts 2 that tighten the jack rod to the aframe and one to tighten the spring.
     
  6. Ferrisdiesel

    Ferrisdiesel Member
    Messages: 32

    Well I think I found the problem then. There are only two nuts on it....one is missing from the a frame