1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Smartlight 2 vertical adjustment

Discussion in 'Boss Plows Discussion' started by sagent, Jan 27, 2015.

  1. sagent

    sagent Junior Member
    Messages: 23

    Out plowing a few evenings ago and notice I cannot see a GD thing with the plowlights when there is no ambient / streetlights. Tried to adjust them vertically and cannot get them any higher. Is there a way to adjust the horizontal light bar itself that the lights mount to? This is with about 600 lbs of ballast in the aft end of the box also
  2. scottydosnntkno

    scottydosnntkno Member
    Messages: 85

    Does your light bar curve up at the ends of forward? If forward, it was put on wrong. There's two bolts on each side that you have to take out and rotate the whole assembly 90 degrees. Look at the diagram on their website for the proper orientation. If it's set up right there should be plenty of adjustment.
  3. sagent

    sagent Junior Member
    Messages: 23

    I will take a look but I think it does curve up. If so what can be done ?