1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Slow reacting uni mount

Discussion in 'Western Plows Discussion' started by TKLAWN, Nov 18, 2008.


    TKLAWN PlowSite Veteran
    Messages: 3,564

    I have a 7'6 uni mount and you have to push very hard on the remote to get it to work once it moves it is fine but it is a little hard on the hand, checked all the connections and just changed the fluid. what to check next?
  2. sechracer

    sechracer Senior Member
    Messages: 478

    If you have to push hard on the remote, its the controller since that part is all circuit board..... try swapping it out with a friends and see if that helps....
  3. JohnnyU

    JohnnyU 2000 Club Member
    Messages: 2,037

    It's more than likely the remote controller, but did you replace the pump screen when you changed the fluid? A plugged screen will also cause sluggish operation.