1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Size of washers for Shoes?

Discussion in 'Residential Snow Removal' started by wpeterson47, Dec 15, 2012.

  1. wpeterson47

    wpeterson47 Junior Member
    Messages: 15

    Anyone know off the inner diameter of the shoe washers for adjusting height? It's a Sno-way for what it's worth.

    Thanks in advance, wep.
     
  2. Truarn

    Truarn Junior Member
    Messages: 16

    My western is 3/4". Probably a std. size for shoes ?
    I just looked it up....it is 3/4" I.D.
     
    Last edited: Dec 15, 2012
  3. South Seneca

    South Seneca Senior Member
    Messages: 474

    Take one with you to the hardware supplier. Mine take a 1" center hole.

    While I was there I also bought extra snap over pins that hold them on.
     
  4. wpeterson47

    wpeterson47 Junior Member
    Messages: 15

    Thanks 2 u both. Plow is in CO and I'm in CA and when I arrive I'll have a foot or two and will need to plow immediately without moving all my new gravel off the driveway. Thanks for the input.

    Will
     
  5. leolkfrm

    leolkfrm PlowSite.com Addict
    Messages: 1,434

    make a gravel guard for the edge...
     
  6. WingPlow

    WingPlow Senior Member
    Messages: 634

    throw the shoes in the trash can and just leave the plow an inch or so
     
  7. South Seneca

    South Seneca Senior Member
    Messages: 474

    Shoes probably won't be much help on fresh gravel. There is a lot of info here on gravel guards. Especially if that's all you're plowing is gravel, that is the way to go.

    On a side note, you could send a foot or two of snow our way.