1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

SHPE2000 problem

Discussion in 'SnowDogg Snow Plows' started by 06HD BOSS, Nov 29, 2010.

  1. 06HD BOSS

    06HD BOSS 2000 Club Member
    Messages: 2,611

    Just hooked the spreader up and everything works fine except the vibrator. It worked fine last month when i tested it after the summer. The light on the switch comes on, and i followed what i could for wiring and everything looks fine. Its not the digital controller if anyone was wondering. Any help or suggestions would be great.
     
  2. mksuwndr

    mksuwndr Junior Member
    Messages: 20

    Check for power at the vibrator, if you have power the vibrator is bad or there is a bad fuse, the fuses are in the controller. Thats where I would start.
     
  3. 06HD BOSS

    06HD BOSS 2000 Club Member
    Messages: 2,611

    Thanks man. Will check that out today
     
  4. erkoehler

    erkoehler PlowSite Veteran
    Messages: 3,265

    I have same situation and same spreader. Today's project.....