1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Shaft length help

Discussion in 'Meyer / Diamond Products Discussion' started by Puddlejumper, Jan 29, 2009.

  1. Puddlejumper

    Puddlejumper Member
    Messages: 74

    So I am replacing the shaft on an E-47 pump. All the tags are gone (of course). My question is this when determining the ram length do you measure with the ram fully extended? Do you measure the ram from the middle of the bolt hole at the top of the ram?

    Thanks for any help!
  2. 04sd

    04sd Senior Member
    from pa
    Messages: 266

    E47 is a 6" ram, the E47H is an 8" ram. The 6 or 8 refers to the lift stroke not the total length of the ram. Most likely you have a standard E47 with a 6" stroke but just measure all the way down vs fully extended to verify.
  3. Puddlejumper

    Puddlejumper Member
    Messages: 74

    Thanks for the help. Any body got a better place to go than Angelo's?