1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

SEHP...what first?

Discussion in 'Fisher Engineering Discussion' started by Snowtraxx, Sep 6, 2005.

  1. Snowtraxx

    Snowtraxx Junior Member
    Messages: 5

    Hello all! First time back since 03 and with a new/older truck a bunch of new problems!

    In June i bought a 96 F-350 with an 8' MM on it. I just put it on for the second time and I am glad it isn't gonna snow for a while. When i hooked it up nothing worked and the directional lights and high beam light were lit on the dash. After turning off and back on she came into it. Ran it up and then back and forth...very slow and barely angles, not to mention that if there is any load on it it will not do anything. It got a bit better but not right after a few minutes, but every so many cycles the dash lights would come on and it would go dead again. The motor on the plow did not seem to get too hot and the voltage didn't drop in the truck much more than previous trucks...

    So thats what I have got now, and I am sure there will be more to come. I'll keep posting with my finds although I don't know how much I will get to work on it this week. Glad to be back on here and i'm already thinking SNOW!