1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

sector sector mesurement

Discussion in 'Sno-Way Discussion' started by 85 Toyota 22R, Dec 21, 2007.

  1. 85 Toyota 22R

    85 Toyota 22R Member
    from IL
    Messages: 68

    Well long story short, the guy I got the plow from had it on a dodge and the a-frame didn't sit level, so it broke the welds on the bushing in the sector and hollowed the hole out and bent it to hell.So i cut the metal out on both sides and replaced it. But now I need to know how far back the 1 1/2" hole for the bushing needs to go. I looked on my St plow but it doesn't seem quit the same so i thought I would double check. So if the Snoway rep. has any of these measurements that would be great. the plow is an older 24 series w/out d/p. Gotta get this plow back on the road asap.
     
  2. 85 Toyota 22R

    85 Toyota 22R Member
    from IL
    Messages: 68

    bump....come on someone has to know