1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Sander Problem

Discussion in 'Truck & Equipment Repair' started by Brad3403, Oct 31, 2012.

  1. Brad3403

    Brad3403 Senior Member
    from Alberta
    Messages: 392

    I've got a 2 yard Saltdogg SS with gas motor. When i start the engine, the clutch is already engaged and starts turning the conveyor. I'm sure the conveyor switch is in the OFF position and have even tried manipulating the switch while the motor is running thinking that maybe the switch was stuck.
    Does anyone have an idea why this may be happening and how to correct it? I'm thinking maybe the clutched is seized in the ON position. If so, is there anything I can spray on it?
     
  2. clark lawn

    clark lawn PlowSite.com Addict
    from NE ohio
    Messages: 1,233

    I would unplug the church from the switch first so you can rule out welded contacts in the switch. Second try smacking the clutch with a hammer to free it up.
     
  3. Buster F

    Buster F Senior Member
    Messages: 208

    And if that doesn't work try using a bigger hammer Thumbs Up