1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

SAM controller for Boss straight blade

Discussion in 'Boss Plows Discussion' started by Scott Sabin, Sep 27, 2015.

  1. Scott Sabin

    Scott Sabin Junior Member
    Messages: 26

    I bought a new controller for my boss striaght blade from Russo power and its backwards left button goes right and right is left . Im not getting response back from them . I figure its in the adapter harness wires that get their flat plug to the boss 9 pin . Anyone else with this type of problem
     
  2. 1olddogtwo

    1olddogtwo PlowSite Fanatic
    Messages: 11,518

    Have you done anything to the hoses recently?
     
  3. Scott Sabin

    Scott Sabin Junior Member
    Messages: 26

    No this new controller was going to be a spare .my original boss works just fine
     
  4. k1768

    k1768 Senior Member
    from NJ
    Messages: 488

    BOSS website has wiring diagrams for the controller. Use that to determine which pins are L/R and swap them on the sam controller. Or return it as defective.
     
  5. Scott Sabin

    Scott Sabin Junior Member
    Messages: 26

    Returned junk SAM controller bought a Boss lesson learned