1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Salt dogg shpe1500 spreader internal fuse?

Discussion in 'Truck & Equipment Repair' started by sid6062, Feb 17, 2015.

  1. sid6062

    sid6062 Member
    Messages: 30

    My spinner has a solid F error code. Manual says short wire or blown internal 40 amp fuse. Wire checks ok. Where is this fuse at? I have 2 inline but they are for the vibrator and rear light. Plz help!
  2. John_DeereGreen

    John_DeereGreen PlowSite.com Addict
    Messages: 1,714

    Is it still under warranty? If so, you'll void the warranty on the controller if you replace the fuse. It's soldered into the controller board. If it's not under warranty anymore, take the cover off and you'll quickly be able to find the fuse. Either remove and resolder a new one in, or I've seen someone solder a 10 gauge wire into each side of where the fuse was and drill holes in the cover and put an inline fuse holder in that. Easy to fix the next time you have an issue.