1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Running wires thru firewall - what's the best spot ?

Discussion in 'Ram Trucks' started by Tahoe99, Aug 1, 2006.

  1. Tahoe99

    Tahoe99 Member
    from NY
    Messages: 76

    Hi all -

    For guys with 2002-2006 Rams 2500/3500, where is the best spot to run cables from the controller in the cab to the engine compartment ?

    Thanks
     
  2. SnoFarmer

    SnoFarmer PlowSite Fanatic
    from N,E. MN
    Messages: 8,489

    There are plenty of passageways on the firewall around and below the brake booster. you may need to add a hole to a grommet. there are some that are not used at all.

    Just pop the hood and take a look, there is no need to drill any holes.
     
  3. Tahoe99

    Tahoe99 Member
    from NY
    Messages: 76

    Thanks

    Thanks Snofarmer.
     
  4. basher

    basher PlowSite Fanatic
    from 19707
    Messages: 8,992

    oon a automatic I like the clutch area. can remove the insert where the pedal would pass through, drill it, add a grommet then replace it. Looks stock.
     
  5. SnoFarmer

    SnoFarmer PlowSite Fanatic
    from N,E. MN
    Messages: 8,489

    Good spot also, basher, Here is a pic of where I ran mine.

    It's to the fender side(drivers) of the break booster on the fire wall. I
    t's hard to see it, but all I had to do is poke a hole in the unused grommet.
     
    Last edited: Feb 11, 2008
  6. Tahoe99

    Tahoe99 Member
    from NY
    Messages: 76

    Thanks for the pics

    Thanks again guys.

    Marcin