1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

RT2 Problems

Discussion in 'Boss Plows Discussion' started by rblake, Dec 11, 2009.

  1. rblake

    rblake Senior Member
    from dayton
    Messages: 291

    Plow worked fine yesterday. Went to move the truck today and the plow would not work. Connections are clean, greased & tight. Went to raise the plow and nothing happened other than the motor stayed on.
     
  2. B&B

    B&B PlowSite Fanatic
    Messages: 12,777

    Check the ground connection on the plow side attached to the lift tower. If it gets weak the motor will pull all the ground, leaving little for the valves. Easy test is to run a set of jumper cables from the neg post on the battery directly to the valve manifold (remove the cover). If everything then works you have a ground issue.