1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Right Signal Lights not working

Discussion in 'Boss Plows Discussion' started by NSRoadEng, Dec 28, 2012.

  1. NSRoadEng

    NSRoadEng Junior Member
    Messages: 18

    My right turn/marker lights will not work.
    When I took the lens off, I found all the connections were corroded so I cleaned the positive copper and negative bulb holders. I now have good voltage on my multi-tester on all circuits, but as as soon as I insert a bulb I have no voltage and the bulbs don't work. This is for both bulbs - marker and turn. Tried switching new bulbs that work fine on the left side. I also held the bulb to contact the ground and positive (not in the holder) and still no light. Anyone know what could be going on here?