1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Return Spring Sizes

Discussion in 'Boss Plows Discussion' started by ajordan193, Jan 24, 2015.

  1. ajordan193

    ajordan193 Senior Member
    from WNY
    Messages: 224

    Why are there two different return spring sizes? I have a few 8'2 and 9'2 steel v's and they all take the smaller spring. I also have an 8'2 poly and that one has the longer spring. Is this because one is poly and the others are steel? The poly is the newer of all of the plows as well. Any input would be appreciated....
     
  2. grandview

    grandview PlowSite Fanatic
    Messages: 14,609

    not sure, With the poly it may need less tension to pull them back, so a longer spring won't snap it back as fast.
     
  3. Mr.Markus

    Mr.Markus PlowSite Fanatic
    Messages: 5,157

    Position of the braces???
    I think the poly is actually heavier than the steel blade.
     
  4. grandview

    grandview PlowSite Fanatic
    Messages: 14,609

    Don't wreck my theory
     
  5. pieperlc

    pieperlc Senior Member
    from 4-5
    Messages: 177

    The newer plows take a longer spring. Look at where the spring attaches to the wing and you'll see the design change.