1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Replacing my radiator support, got a question.

Discussion in 'Ford Trucks' started by SIPLOWGUY, Jun 14, 2004.

  1. SIPLOWGUY

    SIPLOWGUY Senior Member
    Messages: 678

    I am in the slow process of replacing my radiator support on my 93 F150. I dreaded doing it but it has gone pretty well so far except I keep going deeper. I went as far as a new timing chain being it was apart. My question is this: I am putting the truck back together now. I put the radiator support on and I can't fit all the original shims and spacers. I am wondering if I should jack up the support to fit them in or leave them out? The shop manual shows them in as well as a listing in the Ford parts fiche. What to do? Any body guys out there?

    f150 rad suppt.jpg
     
  2. SIPLOWGUY

    SIPLOWGUY Senior Member
    Messages: 678

    Well I thought about it and decided to jack up the radiator support and put the shims and spacers back like the way they came out.