1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

repacking ram ?

Discussion in 'Western Plows Discussion' started by djagusch, Feb 6, 2011.

  1. djagusch

    djagusch 2000 Club Member
    from mn
    Messages: 2,068

    I'm going to put new seals on my unimount rams. Went to un bolt the ram from the moldboard and the bolt needs to be cut off. My thought was if the ram cyl comes out of the ram I could put the seals on from the inside part of the cly. That way I wouldn't need to cut the moldboard bolt. Is this possible?
  2. wild bill

    wild bill PlowSite.com Addict
    Messages: 1,239


    your causing a lot of work for your self just cut them off and get it out were you can work on it !:salute:
  3. got-h2o

    got-h2o 2000 Club Member
    Messages: 2,439

    Agreed. And you can get cyl's so cheap I wouldn't even mess with rebuilding the old ones. But that's just me.