1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Removing Isolation Module/Wiring

Discussion in 'Western Plows Discussion' started by BlueRam2500, May 27, 2008.

  1. BlueRam2500

    BlueRam2500 Senior Member
    Messages: 765

    I need to remove the isolation module and wiring from my truck in order to sell my plow. Can anyone offer advice on how to do this? It looks fairly simple to do, maybe someone on here will know an easy way to do it. Thanks in advance.
  2. B&B

    B&B PlowSite Fanatic
    Messages: 12,777

    Nothing difficult or special about it BR. Disconnect the power & grounds from the battery, disconnect the ignition hot wire (wherever its connected in the truck, should be in the fuse panel).

    Disconnect the head light harness from the stock light harness and reconnect the stock plugs back into the head lights.

    Disconnect and remove the power & ground cables and the under hood solenoid and your good to go.
  3. BlueRam2500

    BlueRam2500 Senior Member
    Messages: 765

    Thanks a lot. Now I just need the truck so I can remove the module.