1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Relieve Valve Problem?

Discussion in 'Meyer / Diamond Products Discussion' started by spcars83, Nov 16, 2009.

  1. spcars83

    spcars83 Member
    Messages: 48

    We had bought a new Meyer plow and it has the E-58H on it and when you have the blade angled all the way to one side and go into a pile, just using a quarter of the blade, the blade will angle back the other way. Is there an adjustment or is there some thing else going on. I had the E60 before and never had any problems.
     
  2. B&B

    B&B PlowSite Fanatic
    Messages: 12,777

    You have an issue with the crossover valve. Could be damaged from a previous impact or have a piece of debris lodged in it thus allowing fluid to leak by. If you're feeling sprite you can disassemble them for inspection but be forewarned there's plenty of little pieces in there. :D
     
  3. spcars83

    spcars83 Member
    Messages: 48

    Ya I have come to the conclusion that is what it probably is. Found a flow chart on Meyer's site finally. I am guessing it is a oring that is leaking. Thanks for the reply.