1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Rams, Cylinders, Pistons

Discussion in 'Fisher Engineering Discussion' started by buddymanzpop, Dec 6, 2009.

  1. buddymanzpop

    buddymanzpop Senior Member
    Messages: 601

    What size are the angle rams and the lift ram on a Fisher MM2 8 foot HD? I see all sizes 1 1/2 x 10, 1 1/2 x 12, 2 x 10, 2 x 12 , 1 1/2 x 6, etc. Also how do you measure these things to determine what size they are?
     
    Last edited: Dec 6, 2009
  2. MRBachand

    MRBachand Senior Member
    Messages: 198

    Measure the fat housing of each should give you the proper length, obvoius enough which one it is... to measure the widgth open your tape and put it over the shiny cylinder and measure the width.