1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Question on hoop dimension

Discussion in 'Meyer / Diamond Products Discussion' started by tsmith, Nov 9, 2008.

  1. tsmith

    tsmith Senior Member
    Messages: 255

    I am looking to see if any body out there with a Meyer that has a factory hoop mount with an e-47 or e-60 pump on it could give me a measurement off it. I need the distance from the lower pump mounting hole on the hoop to the mounting hole for the lift arm on the hoop.
     
  2. swa136

    swa136 Senior Member
    Messages: 149

    15 inches from center of hole to center of hole. :salute:
     
  3. tsmith

    tsmith Senior Member
    Messages: 255

    swa136 Thank you very much, I am changing pumps on my set up and am noticing I didn't get it quite right when I built it.
     
  4. swa136

    swa136 Senior Member
    Messages: 149

    You're welcome, and good luck with your fabricating. :waving: