1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Push Plates Dodge

Discussion in 'Fisher Engineering Discussion' started by unhcp, Dec 9, 2012.

  1. unhcp

    unhcp PlowSite.com Addict
    Messages: 1,243

    From what the everyone on here has taught me, I think these are 03-06 dodge plates because of the extra rib on the back side

    7170-1

    yo.jpg
     
    Last edited: Dec 9, 2012
  2. brad96z28

    brad96z28 PlowSite.com Addict
    Messages: 1,526

    they are....
     
  3. plowguy43

    plowguy43 PlowSite Fanatic
    Messages: 5,269

    These came off my 04 2500 HEMI

    Picture 015.jpg

    Picture 016.jpg

    Picture 017.jpg
     
  4. unhcp

    unhcp PlowSite.com Addict
    Messages: 1,243

    yup that stupid little rib is the difference
     
  5. plowguy43

    plowguy43 PlowSite Fanatic
    Messages: 5,269

    When I sold mine I had a guy with a Cummins tell me it wouldn't fit his (Laramie/Sport Bumper). Not sure what the difference is but apparently there is one.
     
  6. unhcp

    unhcp PlowSite.com Addict
    Messages: 1,243

    yes there is, their is a new mount 7170-2
     
  7. plowguy43

    plowguy43 PlowSite Fanatic
    Messages: 5,269

    I see, at least the mount you have should fit the HEMI Trucks, without the sport bumper. Which are a ton of trucks out there.
     
  8. brad96z28

    brad96z28 PlowSite.com Addict
    Messages: 1,526

    Its not only the difference, its just how you can tell them apart by eye . The 7170-2 sit lower to clear bumpers on larime and newer models.