1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

push bar

Discussion in 'SnowDogg Snow Plows' started by nicks_xj, Dec 3, 2010.

  1. nicks_xj

    nicks_xj Senior Member
    Messages: 170

    how much do they cost for a jeep ?
     
  2. 33yearsinsnow

    33yearsinsnow Senior Member
    from ohio
    Messages: 111

    How much does what cost
     
  3. nicks_xj

    nicks_xj Senior Member
    Messages: 170

    the push bar part of the mount that the plow mounts to
     
  4. doggmountrep

    doggmountrep Junior Member
    Messages: 16

    If you want to custom make your Side Plates and mount the push bar on, you will need to contact your dealer. They can call Buyers for a specific year model of the Jeep. If they don't have it, you will need to know your Width between the frames (outside&inside).
     
  5. nicks_xj

    nicks_xj Senior Member
    Messages: 170

    i know the inside width is is 33"
     
  6. doggmountrep

    doggmountrep Junior Member
    Messages: 16

    If you are using the inside frame to mount it on, you will need a 32.50" push bar (16061157). This is the accomodation of the metal thickness 0.250" both sides. Call your local dealer for this.
     
  7. nicks_xj

    nicks_xj Senior Member
    Messages: 170

    yes sir i am and thank you very much for the info