1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

procaster throttle ?

Discussion in 'Fisher Engineering Discussion' started by vmj, Dec 19, 2010.

  1. vmj

    vmj Senior Member
    from conn
    Messages: 752

    Throttle will go up to choke and then some times not ideal down.. Flick switch or push on linkage and it wiil ideal down, then it wii work for a while then stop again. i checked linkage and replaced switch... Any ideas???? Thanks
     
  2. 2COR517

    2COR517 PlowSite Fanatic
    Messages: 7,115

    Those are spring return, maybe the springs are weak. Corrosion is a huge problem on those linkages.

    I would take it all apart and make sure everything works nice and freely. Then liberally slather everything with Fluid Film.
     
  3. vmj

    vmj Senior Member
    from conn
    Messages: 752

    Springs on the carb?? or is there springs in elec motor? took it all apart couple of times and everything work freely... spray motor with wd-40 before every storm...
     
  4. vmj

    vmj Senior Member
    from conn
    Messages: 752

    ???????? anyone