1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Problems with HT D Plow

Discussion in 'Fisher Engineering Discussion' started by rsails, Sep 18, 2009.

  1. rsails

    rsails Junior Member
    Messages: 24

    I have a F-350 with a Fisher HTD plow.

    The problem I am having is the blade when it sits flat on the ground has about a 4-5 " cutting surface. When I plow I don't get a nice clean pass. I have removed the steal cutting blade hoping that I will wear down the blade and then I could install the cutting edge.

    I believe that I have the blade as vertical as it will go?

    thoughts?
     
  2. 2COR517

    2COR517 PlowSite Fanatic
    Messages: 7,115

    What size is the blade? Can you send some pics of when the blade is on the ground? Take them from the side, looking in at the a-frame/headgear. Get down low to the ground, so we can see what the angle of the a-frame is in relation to the ground.