1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

problem with ex90

Discussion in 'SnowDogg Snow Plows' started by ZachXSmith, Nov 22, 2010.

  1. ZachXSmith

    ZachXSmith Senior Member
    Messages: 145

    I noticed today when we were testing my new ex90 that the drivers side can be pushed in by hand when the blade is down and straight. Do I have to bleed the system or is it a bad valve?
     
  2. smoorman

    smoorman Sponsor
    Messages: 446

    Just the one side?

    Since it's brand new I would say air. We do fill, test, and bleed on the line, but sometimes air is still caught in the system.

    It could work itself out, or you could bleed it. I would fully retracting the drives side, crack the fitting, press the controller to extend the cylinder. Be gentle, it's not a brake, it's a 3GPM pump... Tighten the fitting and repeat on the other side if you need to.

    Not a common complaint, so I'll be curious to hear how it works out.