1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

pro wings on diamond plow

Discussion in 'Meyer / Diamond Products Discussion' started by Woodland, Dec 14, 2005.

  1. Woodland

    Woodland Senior Member
    Messages: 269

    Anyone here had any trouble installing those pro wings on their diamond plow blade. I just got back from attempting it and ran into some trouble. I drilled that first hole exactly 9 5/8" from the top of the cutting edge, following the contour of the blade and exactly 8 1/2" over from the blade edge, and then placed to the wing on the line up the pivot brackets but no go. In order to pivot the wing up high enough to clear the trip edge, it wont sit up against the blade close enough to hit the pivot brackets. As far as I can see, the only way around this is to grind off part of the wing and cut away part of the plow blade. Am I doing something wrong or did you all run into this problem?