1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Pro Wings for a ATV Plow

Discussion in 'ATV / UTV Snow Removal' started by Antlerart06, Nov 30, 2011.

  1. Antlerart06

    Antlerart06 PlowSite Veteran
    Messages: 3,437

    Well I started this project Kinda Down scale of the Western Wings
    My blade is 48'' and needs to be little longer and thought a wing angle 30 degrees would help hold snow and help from loosing snow when it was windrowing
    So far only made one side tonite Going do other side tomorrow Here some pics of it
    Started to make it bolt on the backside but after getting closer being done I changed my mind and going mount in front side Snow flow will be smoother

    SNLS 006.JPG

    SNLS 007.JPG

    SNLS 011.JPG

    SNLS 013.JPG

    SNLS 014.JPG
     
    Last edited: Nov 30, 2011
  2. Antlerart06

    Antlerart06 PlowSite Veteran
    Messages: 3,437

    Here last pic for tonite

    SNLS 015.JPG
     
  3. Antlerart06

    Antlerart06 PlowSite Veteran
    Messages: 3,437

    So far its only 4 lbs of weight
     
  4. sublime68charge

    sublime68charge PlowSite.com Addict
    Messages: 1,070

    looking good so far.
     
  5. flatlander42

    flatlander42 Senior Member
    Messages: 421

    Cool! I like to make things too!
     
  6. Antlerart06

    Antlerart06 PlowSite Veteran
    Messages: 3,437

    Got the other side done and ready mount new cutting edge and the rubber for bottom on the wings O yes put final coat of paint on
     
  7. Antlerart06

    Antlerart06 PlowSite Veteran
    Messages: 3,437

    Here it is Its done and ready for the season I hope my sidewalk guy likes it

    SNLS 005.JPG

    SNLS 006.JPG

    SNLS 007.JPG
     
  8. Antlerart06

    Antlerart06 PlowSite Veteran
    Messages: 3,437

    I made the 48'' blade in to 58'' blade with 30 degree wings
     
  9. tjjn06

    tjjn06 Member
    from Ohio
    Messages: 78

    very nice. was just thinking of this the other day while looking at my atv plow.
     
  10. Antlerart06

    Antlerart06 PlowSite Veteran
    Messages: 3,437

    I dont know how well they will work Got be better then a open blade
    Showed few people and they want set for there plow So I making some more I have 2 orders to make
     
  11. Antlerart06

    Antlerart06 PlowSite Veteran
    Messages: 3,437

    Thanks I make lot things from antlers now getting into metal fab
     
  12. ALC-GregH

    ALC-GregH PlowSite.com Addict
    from pa
    Messages: 1,132

    I need to fab some wings up for my blade.
     
  13. Antlerart06

    Antlerart06 PlowSite Veteran
    Messages: 3,437

    Fun to make just waiting to test them out
    I have 2 other sets to make But I told the 2 guys I wont sell them till I know mine works I might change something