1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Pro wing brackets

Discussion in 'Commercial Snow Removal' started by wls, Nov 13, 2008.

  1. wls

    wls Senior Member
    Messages: 319

    I have a set of wings on my boss, but that is going to be my back-up unit for this year, I want to put a extra set of pro wing brackets on a western plow. Does anyone have a set of instruction for mounting the brackets to the moldboard? Thanks
     
  2. plowtime1

    plowtime1 Senior Member
    Messages: 446

    check the search tool, you may also find it under the western thread, good luck!
     
  3. MileHigh

    MileHigh PlowSite.com Addict
    Messages: 1,827

    It's pretty simple..

    just look at the boss setup, measure the distances, mark the western, and start drilling.

    Since the wings are the same size it'll be the same measurements for the holes you will have to drill into the plow.
     
  4. wls

    wls Senior Member
    Messages: 319

    ya probably is simple, I can't remember if they measured up from the bottom of the moldboad or what. I'll probably get it figured out. Thanks
     
  5. Summerlawn

    Summerlawn Member
    Messages: 62

    i have them in a pdf file....i can email them to you
     
  6. wls

    wls Senior Member
    Messages: 319

    Ok thanks,
    wls012001@yahoo.com
     
  7. Summerlawn

    Summerlawn Member
    Messages: 62

    sent........