1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Pro Flow question

Discussion in 'Ice Management' started by mike6256, Feb 5, 2011.

  1. mike6256

    mike6256 Senior Member
    Messages: 286

    I am looking at a used Pro Flow 2 that was mounted on a F250, does anyone know if the mount will work on my 02 Ram 2500?? I looked at the new mounts and they are $600.00 if purchased after market :realmad: He is willing to give up his mount but I wasn't sure if it can be made to fit?
     
  2. sven1277

    sven1277 Senior Member
    Messages: 480

    You can always weld it to the frame if it doesn't bolt up.
     
  3. mike6256

    mike6256 Senior Member
    Messages: 286

    Ya thats the next option. Just thought it might fit magically....
     
  4. sven1277

    sven1277 Senior Member
    Messages: 480

    The square tube that the hitch tube is welded to on my p/u had just about rusted through. I noticed b/c the trailer was hanging low in the front. Glad I discovered it before the tube let go completely. The safety chains and breakaway are all attached to it. Had to cut it out and weld in a new tube. Wasn't easy getting the stick welder in there.