1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Pricing on boss VBX?

Discussion in 'Boss Plows Discussion' started by rob_cook2001, Aug 27, 2014.

  1. rob_cook2001

    rob_cook2001 2000 Club Member
    Messages: 2,171

    Anyone have an idea on prices on a VBX? spent the last hour searching on line and found nothing.
  2. John_DeereGreen

    John_DeereGreen PlowSite.com Addict
    Messages: 1,717

    Should be around 5K.
  3. Deckscapes

    Deckscapes Senior Member
    Messages: 241

    We were just quoted $5835 plus tax, Installation another $500
  4. gc3

    gc3 Senior Member
    Messages: 713

    $6000 over here
  5. Advantage

    Advantage Senior Member
    Messages: 766

    I'd love to try one but those prices seem pretty high. And $500 for install is insane.
  6. JCPM

    JCPM Senior Member
    from CT
    Messages: 319

    5k here in CT for cash and carry
  7. Jim@esitrucks

    Jim@esitrucks Inactive
    Messages: 1,124

    Give us a ring!
  8. Defcon 5

    Defcon 5 PlowSite.com Addict
    Messages: 1,512


  9. Broncslefty7

    Broncslefty7 Senior Member
    Messages: 563

    not to hijac the thread or anything, but any dealers in this thread know exaclty how far below the bed the spinner hangs on the vbx?
  10. spencers

    spencers Member
    from Utah
    Messages: 77

    I paid 6k + tax for mine
  11. spencers

    spencers Member
    from Utah
    Messages: 77

    I have a stock 2008 duramax and it hangs down about as low as my exhaust is. I'm not a dealer but thought that might help you out. That is also on the highest setting for it too. It can go a lot lower but I don't want to ruin it. lol
  12. Ramairfreak98ss

    Ramairfreak98ss PlowSite.com Addict
    Messages: 1,885

    we have an 06 f350 with a briar dump bed.. the spreader sitting in that has the spinner shield literally sit on the ball of the truck receiver so we don't even take it out.....or assume 6" lower in the bed of the truck normally

    Call Jim at ESI trucks in va
  13. spencers

    spencers Member
    from Utah
    Messages: 77

    ramair, here are the pics of the back on my truck. I compared it to the curb.
    http://<a href="http://s1380.photobucket.com/user/spencerslawnmaint/media/IMG_4412_zps9b493ec2.jpg.html" target="_blank"><img src="http://i1380.photobucket.com/albums/ah173/spencerslawnmaint/IMG_4412_zps9b493ec2.jpg" border="0" alt=" photo IMG_4412_zps9b493ec2.jpg"/></a>
    http://<a href="http://s1380.photobucket.com/user/spencerslawnmaint/media/IMG_4411_zps95e98f50.jpg.html" target="_blank"><img src="http://i1380.photobucket.com/albums/ah173/spencerslawnmaint/IMG_4411_zps95e98f50.jpg" border="0" alt=" photo IMG_4411_zps95e98f50.jpg"/></a>
  14. spencers

    spencers Member
    from Utah
    Messages: 77

  15. spencers

    spencers Member
    from Utah
    Messages: 77

    Like I said earlier it hangs down about as low as my exhaust. Also if you look at the pics it's adjusted all the way up. If you do have a lifted truck there is 4 settings down from what mine is set. Hope this helps you man