1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

power steering pump with hydroboost

Discussion in 'Chevy Trucks' started by richard lepech, Oct 10, 2005.

  1. richard lepech

    richard lepech Junior Member
    Messages: 25

    power pump leaking replaced O rings for 2 bolts, 1 large O ring for housing assy, 1 O ring for fitting assy. put pump back on truck. filled pump started truck, turned steering wheel both directions to bleed out the air. NO LUCK s. wheel still turned very hard. I crack open the line at the hydroboost from the power steering pump no fluid. can somebody tell what i did wrong ?
     
  2. GetMore

    GetMore Senior Member
    Messages: 179

    I forgot the procedure from when I did this on my truck, so remind me, where do the lines go again?
    There is one from the pump to the box, one from the box to the booster, and then a return from the booster to the pump, right?
    Do you still have enough fluid in the pump? That's a lot of hose.
     
  3. scottL

    scottL PlowSite.com Addict
    Messages: 1,603

    I had just replaced my power stering pump and resvoir on my '97 k3500. Simply over time it rusted from what looked like the fittings and leaked. They sell a full rebuild at all the car parts places for around a hundred with warranty. I wouldn't waste time trying to patch an old unit - you'll never win.