1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

power and ground pigtail

Discussion in 'Meyer / Diamond Products Discussion' started by iowa_ironman, Nov 18, 2006.

  1. iowa_ironman

    iowa_ironman Junior Member
    from Iowa
    Messages: 20

    I got my plow all hooked up and ready to go all except where the power and ground wire go to the pump. Is there special ends I need to buy for the ground and power wire to plug into the pigtail, and if so does anyone have any.
     
  2. oakvillerex

    oakvillerex Member
    Messages: 65

    the power should go to one side of the solenoid and the ground is best going to the battery the other side of the solenoid will go to the battery. what kind of truck is this going on? make sure your solenoid is well grounded
     
  3. iowa_ironman

    iowa_ironman Junior Member
    from Iowa
    Messages: 20

    I have it all hooked up I just need a plug on the truck side to plug into the plug and wires coming off the pump.
     
  4. ditchbangin

    ditchbangin Junior Member
    from ohio
    Messages: 10