1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

poly spring on steel edge pusher

Discussion in 'Pro-Tech Sno Pushers' started by Chace, Nov 11, 2012.

  1. Chace

    Chace Junior Member
    from Canada
    Messages: 17

    Is anyone else having problems with the poly spring on the steel edge pushers? i have a 10' but the spring seems to flexible and wont spring back. Making the cutting edge to low on one side of the pusher.
  2. Protech Inc.

    Protech Inc. Senior Member
    Messages: 209


    Sorry to hear you are having this issue. Do you know how old the unit is and can you please message me the serial number? Although these cases are rare, when the poly has many years of use it begins to retain memory and not spring back. It may just need replacement. Also, if the cutting edge impacted something hard it could of possibly deformed the hinge and could be holding the poly in a loaded position. Thanks.