1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

plow works sometimes... if not, the sylanoid clicks... and nothing

Discussion in 'Boss Plows Discussion' started by Stone781, Dec 6, 2008.

  1. Stone781

    Stone781 Member
    Messages: 47

    hey im having a problem where sometimes my straight trip edge will work... but when it doesnt... the sylanoid clicks and nothing happens? when i press any position it just clicks... any help would be appreciated... snow in the morning... working all night til its fixed... thanks my email is endlessdesigns@mac.com if you can help... that will be easier to check
     
  2. wild bill

    wild bill PlowSite.com Addict
    Messages: 1,239

    check all your grounds and the power /ground cable to see if it is making good contact .some times the male pin of the plug closes up ,take a small screw driver and spread apart carefully ,clean up and try . is it the motor solenoid that is clicking or the relays ? if the relays possible bad motor solenoid .:salute:
     
  3. 042500hd

    042500hd Senior Member
    Messages: 251

    I think you'll find this fixes your problem. :nod: