1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Plow won't move...

Discussion in 'Fisher Engineering Discussion' started by BladeLady, Jan 19, 2010.

  1. BladeLady

    BladeLady Junior Member
    from 01778
    Messages: 1

    I've got a straight fisher plow on a GMC Sierra 3500 & the plow won't move. The fish stick won't even light up... checked the fuses and connections. Any ideas?
     
  2. ajslands

    ajslands 2000 Club Member
    Messages: 2,033

    not to be an a**


    did you try the search button?
     
    Last edited: Jan 19, 2010
  3. RepoMan207

    RepoMan207 PlowSite Fanatic
    from Maine
    Messages: 5,033

    Blade. Which plow do you have MM1 or MM2? Iso Module or Relay setup?

    Double check your connection at the grill to ensure it's seated properly.

    Have you checked you accessory wire to see if the fuse is blown? It will be inside the cab running off the end of your control harness.

    Also check you solenoid for any corrosion or broken wires. And again at your battery.

    Double check your control harness connection as well as your controller.

    Then try this if all of that doesn't turn up to be th culprit:

    Control Harness Test.jpg

    Control Harness Test.jpg
     
    Last edited: Jan 19, 2010