1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

plow wont go down help

Discussion in 'Fisher Engineering Discussion' started by z71plowguy, Feb 28, 2010.

  1. z71plowguy

    z71plowguy Senior Member
    Messages: 114

    i cant get my plow to go down help mm 1 8 foot blade 3 plug
     
  2. RepoMan207

    RepoMan207 PlowSite Fanatic
    from Maine
    Messages: 5,031

    Do all of the other functions work?

    It could be a connection, controller, or a tight packing nut to name a few.

    1. Check your connections, ensure there all free of debris, and lube with dielectric grease. Inspect as close as possible for broken wires and what not.

    2. Remove the cover to the cartridge coils, check to make sure all connections are tight. Pull the S1 cartridge and inspect it.

    3. Check your packing nut on the lift ram to make sure it isn't too tight.

    4.Swap out your controller.
     
  3. z71plowguy

    z71plowguy Senior Member
    Messages: 114

    controler was no good got a new one and i might rebuild old one for an extra