1. Welcome to PlowSite. Notice a fresh look and new features? Explore this quick video tour of updates and enhancements. It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

plow wont angle one way

Discussion in 'Arctic Sectional Sno-Pusher' started by james459, Feb 6, 2008.

  1. james459

    james459 Junior Member
    from canada
    Messages: 1

    Ihave an older arctic pump that wont angle one way .It ran low on fluid so I fixed the leak and refilled it and now wont turn one way and I can hear the pump running but it just squeals like its all the way out. If I switcht the lines it will turn the other way and not back please help.:realmad:
     
  2. MItoplock

    MItoplock Junior Member
    Messages: 9

    Was it angling correctly before you added more fluid? I don't know much about these things but it almost sounds like a valve is bad.
     
  3. cooltech

    cooltech Junior Member
    from ontario
    Messages: 5

    It might be the bearing on the motor..Check all your connections first and ground cables..Good Luck.
     
  4. 1bad12valve

    1bad12valve Junior Member
    Messages: 2

    Is your pump the M673 out front pump or M683 under the hood pump? Either way check for power than check crossover releif valve.
     
  5. elite1msmith

    elite1msmith 2000 Club Member
    from chicago
    Messages: 2,762

    stuck valve... almost super simple ....or an electrical problem

    if you can move ur plow any other dirrection...that means ur pumps is good and working

    you said it sounds as if the plow was maxed out in its travel, but doesnt move? i guess what ur saying is that the pump sounds like its trying to push fluid and boaging down.....

    Check that valves for electrical connection, and that the coils are working...if they are, id guess that the valve it self is stuck

    10 min fix...
     
    Last edited: Jul 19, 2008