1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Plow truck light bar

Discussion in 'Truck & Equipment Repair' started by Roy23, Feb 14, 2014.

  1. Roy23

    Roy23 Junior Member
    Messages: 13

    Hey guys I was wondering if you could help me out. I recently bought a 09 ford f250 plow truck, but it came along with a light bar on the roof the brand is Jerr-Dan and I've been trying to figure out how to take off but can't see how so if anybody could help me I would appreciate it thanks!
     
  2. Sawboy

    Sawboy PlowSite.com Addict
    Messages: 1,591

    Torch, plasma cutter, BFH. Or post some pics so we can help ;)
     
  3. leolkfrm

    leolkfrm PlowSite.com Addict
    Messages: 1,401

    might have self expanding lugs like you use in drywall....bolts would be under the lens
     
  4. xgiovannix12

    xgiovannix12 PlowSite.com Addict
    Messages: 1,419

    Big effin hammer normally works.
     
  5. OldSchoolPSD

    OldSchoolPSD Senior Member
    Messages: 242

    Jerr-Dan doesn't make light bars. Someone robbed a code 3 off of a jerr-dan tow truck.
     
  6. Roy23

    Roy23 Junior Member
    Messages: 13

    Oh okay, do you have any info on how to take it off?
     
  7. leolkfrm

    leolkfrm PlowSite.com Addict
    Messages: 1,401

    did you take off the lens and look for bolts?

    any chance of posting a pic to see what you have?
     
  8. Roy23

    Roy23 Junior Member
    Messages: 13

    I finally uploaded some pictures of the light bar I didn't know how to upload them on a message but there in my picture album on my profile if you guys could check and see if you have any suggesting's
     
  9. BostonRamGuy

    BostonRamGuy Member
    Messages: 45

    Roy, should be screws holding on the plastic ends of the light, Pop them off. Then slide big domes off to left and right. Should find bolts inside there between the wires and such. Pop out the bolts and it should dismount.
     
  10. Roy23

    Roy23 Junior Member
    Messages: 13

    Thank you. You think there will be holes after we dismount everything ?
     
  11. leolkfrm

    leolkfrm PlowSite.com Addict
    Messages: 1,401

    yes...glue some undercoat plugs in the holes to seal out water